Hikig 2 Set Desk Mount for Flight Sim Game Joystick, Throttle and HOTAS Systems – Compatible With Logitech X56, X52, X52 Pro, Thrustmaster T-Flight HOTAS, T.16000M, TCA

Superb Quality
I recently purchased the Hikig 2 Set Desk Mount for my flight sim game setup, and I couldn’t be happier with the results. This mounting system is a game-changer for anyone looking to enhance their flight simulation experience. Firstly, the build quality is outstanding. The mounts are sturdy and well-made, providing a reliable and secure platform for my Logitech X56 HOTAS, and are easily detachable by just the simple pulling a lever. I was impressed by the durability of the materials used, ensuring that my expensive flight control peripherals are held in place safely. The set-up was relatively easy, and only took me around ~30 minutes to fully set up both mounts. It’s versatile enough to accommodate various setups, and you can easily change configuration if you ever change your HOTAS set-up. What sets the Hikig Desk Mount apart is its stability during intense flight maneuvers. I no longer experience the frustration of my joystick or throttle slipping or wobbling during crucial moments in the game with them just sitting on my desk. The mounts stay firmly in place, providing a realistic and immersive flying experience.

THE best DIY deal when 50-60% off – not for those easily frightened by giant piles of parts
5 stars because good luck finding any better deal. I got this for $72 USD, which is usually the price of just ONE mount. With this, you get TWO desk mounts that you DIY custom build to support almost any device you want. You can mount this in a variety of different configurations, and I am considering getting a 2nd copy of this kit just for mounting extra parts to the existing frames.Yes, I said custom build. Because let’s just get it right out of the way. The negative reviews, in all their histrionics, are also correct:- Yes, it’s so cheap because a lot of assembly is required- The manual is inaccurate and is more general ballpark inspirational, it doesn’t hold your hand- This is a DIY parts kit – you have to use your brain and figure out a lot on your ownIf you are easily scared by a giant pile of parts, this is not for you. In which case I would encourage you to still try anyway. It really is more intimidating looking than it actually is — which is much the same for the games that use mounts like this. If you don’t have what it takes to assemble this, how will you survive the complexities of flight? Maybe a smartphone or console game would be more suited to you?If you appreciate the greater possibility held by a pile of parts, keep reading. There are some things to keep in mind when assembling that aren’t obvious or mentioned in the manual:☀ The Logitech Extreme 3D Pro isn’t officially supported but can be secured to the mounting rails with 4 Velcro cable/zip-tie strip/wraps. This also goes for just about anything that doesn’t have screw holes.☀ Wipe down all the main metal pieces with paper towels before assembling or your hands will stink from some kind of industrial grease they made this with!☀ The manual says to loosely attach the little trapezoidal silver nuts/bolts onto things _before_ sliding them into the rails. TO MAKE **EVERYTHING** EASIER, disregard the manual and instead first put them directly into the rails (make sure they’re facing the correct way – match their shape to the rail) to create sliding screw holes. To prevent them from sliding out, use the little HIKIG branded square plastic pieces on the ends of the rails. The whole process should now be tremendously easier.☀ If your desk’s front facing edge is not flat/straight but rounded (like mine), you will have a challenge – this mount may pivot/spin around. In this case, either insert/build some kind of shim to provide the mount with a flat straight facing surface, or — if you’re willing to deface your desk — drive a dowel, wood screw, or pin through the screw hole on the top of the mount to provide it with a 3rd contact point that will prevent it from swiveling around.☀ After assembling the clamp, the best path to calibrate the clamp to your desk thickness is as follows:(1) flip the lever *into the locked-on position* before assembling it to the main vertical rail(2) use the rotation of the top of the clamp to snug it against the desk(3) flip the lever down to pull the clamp away from the desk(4) unscrew the clamp’s circular pad A LITTLE TINY BIT to provide extra pressure(5) flip the lever back up to secure the entire assembly – this SHOULD NOT require great force⚠ ! WARNING: DO NOT OVERPRESSURE THE DESK WITH THE CLAMP! ⚠ You only need “just enough” snugness that pulling the mount firmly will wiggle your desk rather than the mount! This kit has no safety functions to prevent you from building it in such a way that it will destroy itself, or your desk. To the reviewer who complained about the metal noticeably bending when mounted, you used WAY too much pressure!

Genial, algo difícil de montar pero una vez montado va genial

Il prodotto è molto valido. Ci sono un sacco di viti di vario genere e abbastanza supporti per adattare quanti più hotas possibili in commercio.In quanto però possessore di un hotas WINWING Orion 1, per fissare lo stick non avrete alcun problema.Per il throttle dovrete armeggiare un po’. Posso dirvi che tra viti e supporti ricevuti in dotazione, anche se non in maniera perfetta, ne sono venuto a capo abbastanza bene.Nel complesso posso dire di essere abbastanza soddisfatto dell’acquisto.